Colour Quenching Patio Set


Materials Needed

  • Old or secondhand patio set
  • Lint-free rag
  • Wire brush or sandpaper
  • Soap and water (if needed)
  • Tremclad Rust Primer
  • Tremclad Rust Paint – colour of your choice

Step 1

Set up your patio set in an open area outdoors. If completing job on your deck or patio, consider using a drop cloth or cardboard to protect from paint drips.

Step 2

Wipe down your table and chairs and clear all debris. You may need warm soapy water for any stuck-on messes, etc. Remove any old or flaking paint chips by lightly sanding or using a wire brush.

Step 3

Apply one coat of Tremclad Rust Primer to the table and chairs. As always, follow manufacturer's recommendations on preparation, application, drying times and clean up.

Step 4

Once your primer is fully dried, apply your first coat of Tremclad Rust Paint in the colour of your choice. Allow your first coat to dry fully before re-application. If necessary, apply your second coat either within 1 hour or after 24 hours. Be sure to follow these time frames closely for best paint results.

Step 5

Now that you have satisfied your desire for colour, quench your thirst with a refreshing glass of lemonade served at your new table!

Products Share Comment

You might also like these ideas

    View More