Hallway Table Refresh

Back
About

Materials Needed

  • Wooden table
  • Drop cloth or old sheets
  • Sandpaper (approx. 220-grit)
  • Lint-free cloth
  • Painter's Touch Ultra Cover 2X Primer Spray
  • Painter's Touch Ultra Cover 2X Spray Paint

Step 1

Set up your project in an open area, either outdoors or in a well-ventilated space such as a garage and cover nearby items with drop cloths to protect them from overspray or mist.

Step 2

Start by removing loose paint from your table with sandpaper. Clean the entire surface with soap and water and allow it to fully dry.

Step 3

Apply Painter's Touch Ultra Cover 2X Primer Spray holding the can 25-40 cm (10-16″) away from the surface covering the table in a steady back-and-forth motion, slightly overlapping each stroke. As always, follow manufacturer's recommendations on preparation, application, dry times and clean up. Allow your table to fully dry.

Step 4

Next, apply the Painter's Touch Ultra Cover 2X Spray using the same method in a colour of your choice. Apply a second coat, if needed, within one hour or after 24 hours. For best results, apply multiple light coats versus one heavy coat to avoid drips and sags. Again, allow time for your table to fully dry.

Step 5

Finally, find a few personal photos and other unique items to display on your table. Enjoy!

Download
Products Share Comment

You might also like these ideas

    View More